Lonestar Pro Detail

Residential & commercial window film

The same technology we put on cars, applied to buildings. Cuts the afternoon heat load, stops floors and furniture fading, and adds daytime privacy without making rooms dark.

Select Building in the quote form and we'll come out and measure. Quoted per window.

Window film shade comparison across the glazing of a modern home

Why it matters in coastal Georgia

West-facing glass here takes a beating from about two in the afternoon until sunset, most of the year. Film is the cheapest way to deal with it short of replacing the glazing.

  • Heat gainRooms stay usable through the afternoon and the AC cycles less often
  • FadingBlocks the UV that bleaches hardwood, rugs, artwork and upholstery
  • PrivacyDaytime privacy from the street without darkening the room
  • GlareScreens and televisions become readable again without closing blinds
  • SafetySecurity film holds the pane together when struck
  • Running costsLess solar gain means a smaller cooling load across the summer
Shade comparison across the glazing of a modern home

Residential film

Most homes here only need it on two or three elevations — whichever glass catches the afternoon sun. We measure, tell you which windows actually matter, and quote per window rather than for the whole house.

  • Living rooms and sunrooms with large west-facing glass
  • Sliding doors and full-height panels
  • Skylights and conservatory glazing
  • Near-clear options where you want no visible change
  • Frosted and decorative film for bathrooms and side lights
Request a measure
A tinted glass storefront at dusk

Commercial film

Storefronts, offices and warehouses. As well as the cooling and glare benefits, film gives a building a consistent look across mismatched glazing, which matters on a frontage that has been repaired or extended over the years.

  • Storefront and shopfront glazing
  • Office partitions, meeting rooms and manifestation
  • Warehouse and industrial roof lights
  • Security film for ground-floor and street-facing glass
  • Work scheduled around your opening hours
Get a commercial quote

Choosing a film

Architectural film is not one product. The right choice depends on what is bothering you — heat, glare, fading, privacy or security — and they are not all solved by the same thing.

What each type is good at
Film typeHeatGlarePrivacyLook
Spectrally selectiveHighModerateLowNear-clear
CeramicHighHighModerateNeutral, light tint
Dual-reflectiveHighHighHigh by dayReflective outside
Frosted / decorativeLowModerateConstantOpaque, etched
SecurityLowLowOptionalClear

What to expect on the day

  1. We clear a working area at each window — you do not need to move furniture out of the room, just away from the glass.
  2. Glass is deep cleaned and scraped. Most installation problems come from contamination, not from the film.
  3. Film is cut to each opening and applied wet, then squeegeed out.
  4. A typical house takes most of a day. A storefront depends on pane count and access.

CuringExpect slight haze or small water pockets for the first week or two — that is installation moisture working its way out through the film. Do not clean the glass during that period, and do not pick at the edges. Once cured, use a non-ammonia cleaner and a soft cloth.

One thing to check firstSome sealed double-glazed units can be at risk of thermal stress if you fit the wrong film to the wrong glass. If your windows are under a manufacturer's warranty, tell us at the measure and we will pick a film that keeps it intact.

Book a window measure

Tell us the property and roughly how many windows. We'll get back to you in one business day or less.

Call now Free quote